|
Product Details:
|
| Battery Specifictaion: | 12V 100Ah | Battery Energy: | 1280Wh |
|---|---|---|---|
| Cycle Time: | 3000-6000 Cycles | Retention Rate: | More Than 80% (2000 Cycles) |
| Application: | RV/Marine/Camp/Boat/Caravan | Self-discharge Rate: | Less Than 3% |
| LED Indicator: | With Led Indicator | Rechargeable: | Yes |
| OEM/ODM: | Acceptable | Warranty: | 3 Years |
| High Light: | 12V 100Ah RV LiFePO4 Battery,12V 100Ah RV Lithium Battery,100Ah LiFePO4 Camping Battery |
||
Phosphate Lithium Iron 12V 100Ah RV LiFePO4 Battery Rechargeable
RV Lithium Iron Phosphate Rechargeable 12V 100Ah Li-ion Camp Battery
Feature of LiFePO4 Battery
1. INTELLIGENT BMS
All of Canbat lithium batteries come with a built-in smart battery management system protects against low temperature, high temperature, over- discharge, over-recharge and short-circuits.
2. MORE USABLE CAPACITY
Sealed lead-acid batteries only provide 50% of useable energy while lithium LiFePO4 batteries provide up to 100%, which means you can discharge the battery entirely and obtain thousands of cycles.
3. LONG CYCLE LIFE
More than 2,500 cycles at a depth of discharge of 100%, 3,500 cycles at 80% and 5,500 cycles at 50%. The recommended DOD is 80%. All of our LiFePO4 batteries are backed up with Canada’s best 10-year warranty.
4. FASTER CHARGING
LiFePO4 batteries can recharge much faster than conventional sealed lead-acid batteries, giving you access to reliable power quicker. Lithium is recommended to recharge in 2 or more hours for longevity.
5. MINIMAL SELF-DISCHARGE
Lithium iron phosphate batteries have a low self-discharge rate of about 2% a month. Unlike sealed lead-acid batteries (SLA), lithium batteries do not face permanent capacity loss due to self-discharge.
IP Deep Cycle LiFePO4 Solar Storage System BMS Battery Pack
12V 100Ah LiFePO4 Battery Specification
|
Battery rated voltage |
12V |
|
|
Rated capacity (10 hour rate) |
100Ah |
|
|
Dimension |
Length |
329mm (12.96inches) |
|
Width |
172mm (6.78inches) |
|
|
Height |
214mm (8.43inches) |
|
|
Total Height (with terminal) |
236mm (9.30inches) |
|
|
Weight approx |
14.7Kgs |
|
|
Terminal |
M8 copper terminal |
copper wire |
General Purpose Battery Characteristic
|
Cell type |
LFP 32700 |
|
End of charge voltage |
14.6V |
|
End of discharge Voltage |
10V |
|
Charge Method |
0.2C (0.5A) CC/CV |
|
Max.Continuous charge current |
100A |
|
Nominal Discharge Current |
100A |
|
Max. Pulse Discharge Current |
3C/10S |
|
Charge Temperature |
0 ºC to 45 ºC (32F to 113F) @60±25% Relative Humidity |
|
Discharging Temperature |
-20 ºC to 80 ºC (-4F to 140F) @60±25% Relative Humidity |
|
Storage Temperature |
0 ºC to 40 ºC (32F to 104F) @60±25% Relative Humidity |
12V 100Ah LiFePO4 Battery Image
12V 100Ah LiFePO4 Battery Data Curve
12V 100Ah LiFePO4 Battery Packing Step:
Storage and Transportation of LiFePO4 Battery 12.8V 100Ah
· Based on the character of cell, proper environment for transportation of LiFePO4 battery pack need to be created to protect the battery.
· During transportation,50% SOC must be kept to ensure that short circuit, appearance of liquid in the battery or immersion of battery in liquid never occur.
· Battery should be kept at -20℃～45℃ in warehouse where it’s dry, clean and well-ventilated.
· During loading of battery, attention must be paid against dropping, turning over and serious stacking.
Warning!
· Never throw the battery into water, keep it under dry, shady and cool circumstance when not use.
· Never upside down the positive and negative.
· Never connect the positive and negative of battery with metal.
· Never ship or store the battery together with metal
· Never knock, throw or trample the battery.
· Never cut through the battery with nail or other edge tool.
Contact Person: Colin
Tel: +86-755-84862035
