|
Product Details:
|
| Specification: | 51.2V 50Ah | Voltage Range: | 40V-58.4V |
|---|---|---|---|
| Rated Capacity: | 50A | Type: | Telecom Battery |
| Communication: | CAN, RS232, RS485 | Protocol: | Moubus RTU/ASCII |
| Self-discharge Rate: | ≤3% | Retention Rate: | ≥80% After First 3 Years |
| Material: | LiFePO4 | Trademark: | OEM |
| High Light: | 50A 48V LiFePO4 Battery,RS232 48V LiFePO4 Battery,RS485 48 Volts Lithium Battery |
||
Telecom CAN RS232 RS485 50A 48V LiFePO4 Battery Deep Cycle
48 Volts Lithium 51.2V 50A Li-ion Communication Battery with RS232/485 CAN
LiFePO4 Battery Key Features :
♦ Intra-system balancing
♦ Excellent high temperature performance
♦ Long cycle times and long service life
♦ Safe Lithium Iron Phosphate Technology
♦ Thousands of cycles, under normal conditions
♦ High energy density and conversion efficiency
♦ Environmental Friendly, without any heavy metals
♦ Complete with Battery Management System built-in
♦ Low self discharge rate and high retention rate
♦ Easy installation, can be in standard cabinet or be wall-mounted
♦ Built-in automatic protection for over-charge, over-scharge & over-temperature conditions
Applications :
♦ Wheelchairs and scooters
♦ Solar/wind energy storage
♦ Back-up power for small UPS
♦ Golf trolleys&buggies
♦ Energy storage system
Customized Available Lithium Iron Phosphate Energy Storage System Battery
Battery Appearance
Battery Characteristics
| Item | Specification |
| Model | LFeLi-4850A |
| Rated Capacity | 2560AH |
| Normal Voltage | 51.2V |
| Discharge Ending Voltage | 40V |
| Charging Limited Voltage | 58.4V |
| Max. Charging Current | 50A |
| Max. Continue Discharging Current | 50A |
| Weight | Approx. 30kg |
| Display | Without a display screen |
| Parallel Connection | Parallel connection or series connection available |
| Dimensions(W*D*H)mm(inches) | 443*410*90mm |
| Communication Mode | RS232, RS485, CAN |
| Design Life | More than 10 years |
| Cycle Life | More than 3000 cycles at 80% DOD |
| Outer Package Material | White bake lacquer steel case (battery rack or cabinet is optional) |
| Operating Temperature | Charging: 0 to +45 ºC Discharging: -20 to +60 ºC Storage: -20 to 60 ºC |
Charge and Discharge Curve of 48V 50Ah LiFePO4 Battery
Tips!
· Never use or keep the battery under the high temperature. Otherwise it will cause battery heat, get into fire or lose some function and reduce the life. The proposed temperature for long-term storage is 10-45℃.
· Never throw the battery into fire or heating machine to avoid fire, explosion and environment pollution; scrap battery should be returned to the supplier and handled by the recycle station.
· Never use the battery under strong static and strong magnetic field, otherwise it will destroy the protecting device.
· If battery leaked, the electrolyte get into eyes, please don’t knead, please wash eyes by water and send to hospital. Otherwise it will hurt eyes.
· If battery emit peculiar smell, heating, distortion or appear any unconventionality during using, storage or charging process, please take it out from device or charge and stop using.
· Never cut the battery in socket directly; please use the stated charger when charging.
· Check the voltage of battery and relevant connectors before using the battery. It can’t be used until everything turns out to be normal.
· Prior to charging, fully check the insulativity, physical condition and ageing status, since breakage and ageing are never allowed; the pack voltage must not be less than the cutoff voltage, if not, it’s abnormal and that battery needs to be labeled. The user should contact our Customer Service Dept and it can’t be charged until repaired by our staff.
· The battery should be stored in full SOC. It needs to be charged once if out of use for as long as half a year.
· Clean the dirty electrode, if any, with a clean dry cloth, or poor contact or operation failure may occur.
Contact Person: Colin
Tel: +86-755-84862035
