Shenzhen Elite New Energy Co., Ltd. 86-755-84862035 colin@elitenewenergy.com
48V 200Ah 10kwh Lithium Phosphate Battery ESS Household Community

48V 200Ah 10kwh Lithium Phosphate Battery ESS Household Community

  • High Light

    10kwh Lithium Phosphate Battery

    ,

    48V 200Ah Lithium Phosphate Battery

    ,

    ESS Lithium Ion Battery

  • Capacity
    48V 200Ah
  • Rated Capacity
    200Ah
  • Voltage Range
    40V-58.4V
  • Energy
    10240Wh
  • Type
    Powerwall Battery
  • Cycle
    ≥4000 Times
  • Self-discharge Rate
    3%
  • Retention Rate
    ≥80%(2000 Cycles)
  • Application
    Household/Community ESS/UPS
  • IP Standard
    IP67
  • Place of Origin
    Guangdong, China
  • Brand Name
    Elite
  • Certification
    CE, UL, MSDS, UN38.3, MSDS
  • Model Number
    48V 200Ah 10kWh Powerwall
  • Minimum Order Quantity
    1PCS
  • Price
    $599.99-$2199.99/PCS
  • Packaging Details
    Carton box with pallet/Wooden Case
  • Delivery Time
    20-30 Days
  • Payment Terms
    L/C, D/A, D/P, T/T, Western Union, MoneyGram,Paypal
  • Supply Ability
    10000 PCS/Month

48V 200Ah 10kwh Lithium Phosphate Battery ESS Household Community

48V 200Ah 10kwh Lithium Phosphate Battery ESS Household Community

 

10kWh Power Bank 51.2V 100Ah LiFePO4 Li-ion Battery with Built-in BMS

 

Features of 51.2V 100Ah 10kwh Powerwall Battery

 

♦ Longer Cycle Life

Offers up to 20 times longer cycle life and five times longer float/calendar life than lead acid battery , helping to minimize replacement cost and reduce total cost of ownership
♦ Lighter Weight

About 40% of the weight of a comparable lead acid battery . A " drop in" replacement for lead acid batteries
♦ Higher Power

Delivers twice power of lead acid battery ,even high discharge rate, while maintaining high energy capacity

♦ Wider Temperature Range

-20ºC~60ºC
♦ Superior Safety

Lithium Iron Phosphate chemistry eleminates the risk of explosion or combustion due to high impact overcharging or short circuit situation

 

Parameters of 48V 400Ah LiFePO4 Battery

 

MODEL ELT48200
ELECTRICAL SPECIFICATIONS
Cell Type - Chemistry Prismatic- LiFePO4
Rated Capacity 200Ah
Rated Voltage 51.2V
Energy 10240Wh
Resistance 30mΩ
Self Discharge <1.5% per month
Maximum Modules in Parallel 16
MECHANICAL SPECIFICATIONS
Dimensions (L x W x H) 880*163*520mm
Weight 100Kg
Enclosure Protection IP65
DISCHARGE/CHARGE SPECIFICATIONS
Discharge Cut-off Voltage 40V
Max Continuous Discharging Current 100A
Peak Discharge Current 130A for 3 seconds
Recommended Discharge Current 100A
CHARGE SPECIFICATIONS
Charging Limited Voltage 58.4V
Max Charging Current 100A
Recommended Charge Current 20A
TEMPERATURE SPECIFICATIONS
Charge Temperature Range 0~45ºC
Discharge Temperature Range -20~60ºC
Recommended Operating Temperature 15~35ºC
Storage Temperature & Humidity Range
(Less than 1 month)
-20~35ºC, 45~75%RH
Storage Temperature & Humidity Range
(Less than 3 months)
-10~35ºC, 45~75%RH
Recommended Storage Temperature & Humidity Range 15~35ºC, 45~75%RH
OEM
Available on request

 

Battery Appearance

 

48V 200Ah 10kwh Lithium Phosphate Battery ESS Household Community 048V 200Ah 10kwh Lithium Phosphate Battery ESS Household Community 1

51.2V 200Ah 10kWh Powerwall System Application Introduction

 

Under the condition of good illumination in the daytime, the DC power from PV panel is changed into AC through inverter to supply power for household load. If the household load cannot run out of photovoltaic power, the remaining power will be stored in the battery. If the battery is full, photovoltaic power will be supplied to the grid. In the night or rainy days, photovoltaic cannot generate electricity. The battery supplies power to the home load through an inverter. If the battery is low, the household load will take power from the grid.

 

1. PV Self-use Surplus Power to Grid

Under the condition of good illumination in the daytime, the DC power from PV panel is changed into AC through inverter to supply power for household load. If the household load cannot run out of photovoltaic power, the remaining power will be stored in the battery. If the battery is full, photovoltaic power will be supplied to the grid. In the night or rainy days, photovoltaic cannot generate electricity. The battery supplies power to the home load through an inverter. If the battery is low, the household load will take power from the grid.

 

2. Peak Shaving and Valley Filling

In some countries and regions where peak valley time of use price is implemented, if the difference between peak price and low price is large, the application mode of peak shaving and valley filling can be adopted in energy storage system. In the low electricity price period, the energy storage system is charged; in the peak period of electricity price, the energy storage system supplies power to the household load. It can avoid users using too much power grid when the electricity price is high, and save energy expenditure.

 

3. Standby Power Supply

In some extreme weather (such as tornadoes, typhoons, hail), or substation operation failure, power supply will be interrupted. If the energy storage system is installed, the user can still enjoy sufficient power guarantee in this case.

 

48V 200Ah 10kwh Lithium Phosphate Battery ESS Household Community 2

 

Battery Testing

 

1. Waterproof test on lithium battery

Elite LiFePO4 batteries are widely used in marine, like the Yachts, Fishing Boats, Sailing boats, Kayak, Catamaran, etc.

Elite including special processing on lithium battery production crafts to meet the requirements of IP standard in different installation and operating environments. If you want a waterproof lithium battery, we are very pleased to provide you, please let us know your requirements.

 

2. Analog Car Vibration Test of Lithium Battery
To ensure the safety of our lithium batteries, we not only had many electric tests but also had a series of environmental tests, including the Analog Car Vibration Test.

Test Result: Elite LiFePO4 is suited to all the above road conditions, not only with stable performance but also safe and secure.

 

3. Nail Penetration Test
The Elite LiFePO4 battery pack is penetrated by two nails, after 6 minutes, there is no fire, no explosion during the whole testing process.

The stable chemistry of the lifepo4 lithium-ion battery proofs to be outstanding safe for use even in an extremely tough operating environment.

 

4. Drop Test
Elite 24V 200Ah LiFePO4 lithium-ion battery pack weight is 53kgs. it is dropped from 50 meters height at 120km/h speed. No fire, no explosion.

 

Why Choose US:

 

1. We offer one-stop power solutions, which saves design time and cost for customer:
-- Pack design / External Case design / BMS design

2. Strict quality control system which enhances customers' competitiveness:
-- 100% PCM test by IQC
-- 100% Capacity test by OQC

3. Delivery on time & excellent service:
-- Fast Delivery in 10 days if stock
-- 8h response & 48h solution

4. Experienced R&D team, be customer's professional power solution consultant:
-- Comprehensive Battery Test Center (Safety and Reliable test)
-- Powerful ODM Ability to Afford Customized Design Requirement